Generic FY6900 DDS Signal Generator, 60MHz Frequency Meter Counter, 250MSa/s Double Channel Function Generator, Arbitrary Waveform, High Precision, LCD Display with Graphics

Features- Adopt the Direct Digital Synthesizer (DDS) technology and provide stable, precise, pure and low distortion signals- The standard 3-pin power plug increases the grounding protection and effectively eliminates the leakage current on the BNC terminal- 2.4 inch TFT Color LCD with 320×240 resolution, displaying parameters and graphics of the two channels at the same time- Enable to store 64 arbitrary waveform data files, each one of waveform storage depth 8192 points * 14bits- Various modulation types: AM, FM, PM, ASK, FSK and PSK modulations- Standard dual full functional channels which are equivalent to two independent generators.- Channel SYNC Function: Support waveform copy and state copy between channels- Precisely adjust the phases of the two channels, Precision can be 0.01°- Minimum amplitude resolution can be up to 1 mV. Amplitude range is 0~20Vpp- Duty-cycle of each channel can be adjusted independently0.01%-99.99%, the adjusting resolution is 0.01%-10V~+10V DC Offset function; Resolution 0.001V- Output short-circuit protection: All channels can work more than 60 seconds when the load is short-circuitedSpecifications- Material: ABS- Model: FY6900- Supply Voltage: AC100V~240V- Sine: 0~60MHz- Square: 0~25MHz- Ramp, Triangle: 0~10MHz- Pulse: 0~10MHz- TTL/CMOS: 0~10MHz- Arbitrary Waveform: 0~10MHz- Min. pulse width: 20ns(All m- Accuracy: ±20ppm- Stability: ±1ppm/ 3hours- Amount (Save & Load): 20- Position (Save & Load): 01 to 20 (01 for start default value)- Type: USB to Serial interface- Communicating Speed: 9600bps (Industrial standard)- Protocol: Command line mode, providing communication protocols.Package Content- 1 x Signal Generator- 1 x USB Cable- 1 x Power Cable- 1 x BNC-BNC Cable- 2 x BNC-Clip Cable

• DDS-based signal generator (Direct Digital Synthesizer) offers high stability, high precision, and low distortion
• Frequency generator features a 2.4” TFT color LCD display to show parameters and graphics of the two channels at the same time
• Function generator has a built-in high D/A converter chip to provide high anti-interference, sampling rate of 250MSa/s, vertical resolution of 14bits
• Signal generator can sweep 4 properties of signals (frequency, amplitude, offset and duty cycle), and has 2 sweep types (linear and logarithm), sweep time of 0.01S~999.99s, and up/down/roundtrip sweep directions
• Signal generator can be used independently or controlled via computer host software, providing 3 windows - waveform window, text window, and control window